HELP !
I am looking for a set of Std. Rings for a Sachs K80 engine. I bought a new engine off ebay a year or more ago and when we put this engine in a
Hercules K50GS frame we found the engine was missing the rings. Now we are getting desperate.
HELP !
Dwight
Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.
Maybe Jake Fisher or "Speedy"....just a thought.......
Check with Donny hes got all of larry stuff and there is alot of sachs rings.Herm
Herm
Quotequote:Originally posted by herman
Check with Donny hes got all of larry stuff and there is alot of sachs rings.Herm
Herm
no response from either.
Dwight
Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.
Dwight,
Are both rings square or is the top a Dykes or Keystone style ring?
Martijn may be able to find some that will work. He sells lots of parts for 50 to 100cc engine's.They RR those a lot where he lives.
46 mm is the right bore size?
John D.
Dwight,
I am leaving in the am to start hauling parts back to CA from MO. I will check to see if Larry even had these rings. I don't have a good answer for you right now.
Donny Smith
I think both rings are square. They for sure have no Dykes ring. Lee says it is a 46mm. Std. K80. I have no idea where the rings went or if they were ever installed. The engine is new and never run.
Thanks for looking Donny.
Dwight
PS: Got the side case.
Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.
Dwight,
Seat is on the way too!
Donny Smith