Print Page - Lectron Air Boot

Title: Lectron Air Boot
Post by: Jdbglover on June 25, 2004, 11:59:26 PM

I have a 34mm Lectron Carb, that I am wanting use on my 75 'Piner. To do so, I need the air boot that goes from the fiberglass air box to the carb. I have check with Al and H&H and they are out. Does any body have a spare, they could part with. I am also open to any other methods of connecting the air box to the carb.

Thanks
John

Title: Lectron Air Boot
Post by: Steve Minor on June 26, 2004, 07:37:14 AM

Could you use a section of radiator hose, of the proper diameter, until the proper air boot can be found?

Title: Lectron Air Boot
Post by: Dennis D on June 26, 2004, 10:05:35 AM

I have a new one that I got from Al that I am not going to use. Contact me off list and we'll work something out. [email protected]
Put airboot in the subject line so I don't delete it. Dennis D

Title: Lectron Air Boot
Post by: Jdbglover on June 27, 2004, 01:57:23 PM

Dennis

Thanks for the offer. I have emailed you off the list. Please let me know if have not received the email. My email addy is [email protected]

Thanks

John Glover

Title: Lectron Air Boot
Post by: Rain Man on June 27, 2004, 05:01:40 PM

John, I've used radiator hose on my Lectron equiped 76 MC5 250 PENTON and it worked. I cant say if the rubber turns to mush after awhile. Neoprene rubber is the fuel proof stuff.
I started the bike with the radiator hoses and road it briefly (needs a swing arm bush bad)
Raymond

Title: Lectron Air Boot
Post by: herman on June 27, 2004, 07:05:27 PM

Yes you can use radator hose on a mc but not on a gs model with fibberglass box as they are both diffent sizes.

Herm

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Jdbglover on June 25, 2004, 11:59:26 PM