Does anyone know what the ring end gap spec. is for a cylnider bore on a 175?
Thanks
Vance
Vance,
I don't have a 175, but per some specs I have in a publication from Al Buehner, here goes.
Max allowable piston to cylinder clearance:
175cc -- .006" to .007"
Specs for ring end gaps:
175cc -- .010" to .012" minimum
.018" to .020" maximum
Clearance specs for boring cylinders:
175cc -- .003" to .0035"
Probably a good idea to double check this with a manual from Al.
Hope this helps.
Robert Manucy
72 Berkshire
72 Six Day
Vance It all depends on the piston/ring manufacturer. Each require different clearances so be very careful. I have seen piston ring end gap for .024 thick rings as high as .075 - .105 end gap.;) The same as hole drilling specs for the front of pistons, all different!