Penton Owners Group

General Discussion => Penton Talk => Topic started by: grandpaul on July 04, 2001, 12:18:47 PM

Title: 125 top end parts needed
Post by: grandpaul on July 04, 2001, 12:18:47 PM
'69 125 Penton: need piston, rings, pin, circlip, head & base gaskets, head bolts. Also need (2) Bing carb overhaul kits. My cylinder measures approx. 2-1/8" diameter, I don't know if this is stock or oversize, but it's smaller than a .080 piston I have that measures 2-3/16".

I also need (2) petcock for a DKW 125 (7/16" nipple).



GrandPaul,
Host of the Triumph Bonnevilles Forum at //www.delphi.com/grandpaul
Title: 125 top end parts needed
Post by: OUCWBOY on July 04, 2001, 01:39:56 PM
You could try Larry Perkins (THe Penton Man), I understand he may have what you need.

Donny

San Diego Area Penton Owner.
Title: 125 top end parts needed
Post by: Larry Perkins on July 04, 2001, 03:09:01 PM
Yes, I have Sachs pistons.  At last count over 300 of them in various sizes.  I have all the gaskets and bolts too but not the petcocks.  E-mail me on parts at [email protected]

 
Title: 125 top end parts needed
Post by: Doug Wilford on July 04, 2001, 08:26:56 PM
Grandpaul;
Fischer Cycle has the petcocks if they are the same as Penton used.   His address is in the parts link.