Print Page - Mains for a 'Piner

Title: Mains for a 'Piner
Post by: farmer58za on February 20, 2005, 10:42:01 PM

Hi guys
What are the correct type size and grade for the main bearings on a '75 Jackpiner (KTM GS 175)?
Thanks in advance

Regards

David
'75 KTM GS175
'75 KTM GS250
'75 KTM GS400

Title: Mains for a 'Piner
Post by: Rain Man on February 21, 2005, 05:36:29 PM

A Crank bearing question, ... hhmm.
I like SKF bearings myself. Not sure of the following manufacture's numbers:
DIN 615 M25
DIN 6504 BA
DIN 625 6204

Dave, these are the numbers I read out of a manual for a 197...

Raymond
Down East Pentons

Title: Mains for a 'Piner
Post by: OUCWBOY on February 21, 2005, 11:28:20 PM

My parts manual shows DIN 615 L 25 for the 175 and the 125. The 250 and the 400 shows the DIN 615 M 25.

Donny Smith

Title: Mains for a 'Piner
Post by: farmer58za on February 22, 2005, 02:22:47 AM

Thanks

Regards

David
'75 KTM GS175
'75 KTM GS250
'75 KTM GS400

Penton Owners Group

General Discussion => Penton Talk => Topic started by: farmer58za on February 20, 2005, 10:42:01 PM