Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: KJDonovan on December 29, 2005, 02:26:06 PM

Title: Wanted - Spacer Bushing for Front Hub
Post by: KJDonovan on December 29, 2005, 02:26:06 PM
I'm am looking for a spacer bushing for my front hub for a 72 Jack Piner, the PN is 51-09-082-000.  Its the bushing that is used in place of the pickup for the speedometer.  If anyone has a line one one of these give me a shout.  

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
Title: Wanted - Spacer Bushing for Front Hub
Post by: wolfmanonapenton on December 29, 2005, 04:19:15 PM
You can cut them from pipe tubing and make your own with a tubing cutter?12 to14mm wide with a innerdiameter the sameId as the nut that is shaved?The same od as inner hub axle od thickness of bushing about2mm you could make some for your other bikes as all were same!;)
Title: Wanted - Spacer Bushing for Front Hub
Post by: John Ehrhart on December 29, 2005, 04:46:17 PM
And if you are cutting down your bars, the cuttings work perfectly as spacers and have on mine for --wow--thirty years!
Text only | Text with Images