Print Page - need 125 d model intake manifold

Title: need 125 d model intake manifold
Post by: bildough on January 25, 2006, 04:14:55 PM

I am in desperate need of an intake manifold for the D model 125. I would hate to have to machine the head to get the new Mikuni manifold to fit. Could someone please help me out.

Bill Cappel
[email protected]
8182070572

Title: need 125 d model intake manifold
Post by: gooddirt on January 25, 2006, 04:59:36 PM

BILL, The MIC manifold should work if you have the right one , may need to elongate the holes a little on the manifold.

Title: need 125 d model intake manifold
Post by: bildough on January 25, 2006, 09:16:03 PM

the Mikuni manifold is flush and the cylinder has a 5mm offset leaving a 5mm air gap

Penton Owners Group

General Discussion => Penton Talk => Topic started by: bildough on January 25, 2006, 04:14:55 PM