I am in dire need of an intake manifold for a 125 six D Model engine. I would hate to have to machine the cylinder to get the Mikuni manifold to fit. Could someone please help me out so I can ride it at Gatorback. Thanks so much
Bill Cappel
[email protected]8182070572
Bill ,I can let you use one for the race and then get it back from you when you get back to oregon. Only one thing I need to look for it this weekend in my pile-o- penton parts. [8)][8)] L Good .
larry;
i sure appreciate your efforts, and especially your generosity. But i need a more permanent solution. I need to buy one so I have the bike together not awaiting a part. If I cant get the manifold Ill just have to ride the Husky 125 but would prefer to be on my trusty Penton.
Bill Cappel
Bill, I was able to modify a unit that I bought from Pro-Flo to fit my six fin cylinder. I also had to modify the cylinder. This meant machining off the notch affair. Obviously if you want to keep the cylinder stock this won't work for you. I would try the Monark site and see if you can get a hold of the guy that runs that site. Larry how did your friends arm and shoulder heal after Carnage-gie? I'm looking for an aluminum seat base in good shape for a Penton. Do you have anything like that in your pile Larry? Gavin