Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: kevin1971 on March 12, 2006, 01:07:54 PM

Title: Need front fender brace steel tanker
Post by: kevin1971 on March 12, 2006, 01:07:54 PM
Also need choke lever assy and front fender brace for a 1971 Steel tank 125 Six Day. Thanks, Kevin T. Brock
Title: Need front fender brace steel tanker
Post by: Randy Kirkbride on March 12, 2006, 08:59:02 PM
Kevin,
I have a rear brake pedal. Send me an email with your address.
Title: Need front fender brace steel tanker
Post by: DKWRACER on March 22, 2006, 08:19:20 AM
Kevin, I may have choke lever n plunger for Bing...Tom Brosius
Title: Need front fender brace steel tanker
Post by: Randy Kirkbride on March 22, 2006, 09:06:11 AM
Kev,
I found an old clutch assembly. I don't know anything about it's condition.  Email me your address.
Title: Need front fender brace steel tanker
Post by: OUCWBOY on March 22, 2006, 11:49:29 AM
Clutch assemblies are getting to be like gold, hard to find and expensive. Hope the one Randy has is useable. I have been looking for NOS clutch plates for a couple of years now and can't seem to locate any.

Donny Smith
Title: Need front fender brace steel tanker
Post by: Randy Kirkbride on March 23, 2006, 08:15:36 AM
Kev,
I found your address so I'm sending the clutch assembly out today.
Title: Need front fender brace steel tanker
Post by: hrbay on March 25, 2006, 07:53:39 PM
Kevin, I have several Puch fender braces off of Ceriani forks but don't know if they are the same as the steeltanker, two rails with a plate between drilled for fender bolts. Has an H shape with a bolt hole on the end of the rail for fender bolts. They are ruff but useable. Can send pic..... [email protected]

GC
Text only | Text with Images