Print Page - More Bearings

Title: More Bearings
Post by: OUCWBOY on April 13, 2006, 06:07:03 PM

I have two new bearings that I can't ID what they fit. The number is 7305 BEA/G/Y ABE C3. Any ideas??
Thanks

Donny Smith

Title: More Bearings
Post by: bentrims on April 13, 2006, 07:16:10 PM

Thats the bearing that goes into the right elbow of us vintage guys from doing too many 12oz curls. Is your elbow ready for the rebuild Donny?
TB

Title: More Bearings
Post by: Rain Man on April 13, 2006, 08:19:39 PM

I've seen that number before Donny, give me a day to remember and research... hhhmm

Raymond
Down East Pentons

Title: More Bearings
Post by: OUCWBOY on April 13, 2006, 08:42:21 PM

Ray,
Thanks!

Tom,
I'm on my 3rd overhaul on that elbow!!!!

Donny Smith

Title: More Bearings
Post by: Lew Mayer on April 13, 2006, 10:10:30 PM

Tom,Do a good 16 oz (pint). Stout is good for you and builds better than 12 oz curls.:D

Lew Mayer

Title: More Bearings
Post by: sixdazed on April 13, 2006, 10:26:05 PM

I've heard rumor of a new 2 into 1 hi-flo straw that allows you to consume 2 pints at once,or pint of bass 1 side,pint of Jack in the other........watch your jetting though!!!! :-)

ric emmal

Title: More Bearings
Post by: bentrims on April 13, 2006, 11:45:10 PM

Lew & Ric,
Next race I'm pitting by you guys to get the technique down.[:p]

Title: More Bearings
Post by: sixdazed on April 14, 2006, 02:04:51 AM

Ok Tom,Sounds Good!DONNY-contact me URGENT!F21M info for you-check your email!!! Ric

ric emmal

Title: More Bearings
Post by: OUCWBOY on April 14, 2006, 02:12:48 AM

Ric,
No email in my box??!!!

Donny Smith

Title: More Bearings
Post by: sixdazed on April 14, 2006, 03:41:54 AM

How about now?

ric emmal

Title: More Bearings
Post by: OUCWBOY on April 14, 2006, 04:19:16 AM

Got it, Thanks!!!!

Donny Smith

Penton Owners Group

General Discussion => Penton Talk => Topic started by: OUCWBOY on April 13, 2006, 06:07:03 PM