Is there anyone out there in Pentonville that has a centerstand for a 1968 Penton that I could buy or send me the dementions that I could have one made up. This the one that has the bend at the top frame mount. I need this to complete my 68 Six Day. Any help would be appreciated.
THank You, Lee Buffenmyer
Lee,
Give it a day or two and if you don't find one. If that doesn't happen I will get a '68 out and take some pictures for you.
[email protected]Ron Carbaugh
Hi Lee,
Sorry I don't have a stand for you, but do have a sons '68 close by and could take some photos of his unit with measurements for you if needed. Send me an email with your address so I can use to forward the photos. Good Luck with your project !!
Nelson McCullough
[email protected]
Thanks Ron and Nelson for your reply I forgot to enclose my email address it is
[email protected] Thanks again, Lee Buffenmyer
Lee, You have mail with a few photos for starters. Nelson
Thanks Nelson & Ron for the help on this centerstand project I will have someone local fabricate some for me. If any one else needs one let me know. Thanks again, Lee Buffenmyer
If this stand will work for a '70 I need one. Steve
Steve,
The center stands for a 1970 Penton are a little different they are straight and flat at the top mount. The 1968 Penton center stands have bend below the top mount. I'm not sure if a 68 will fit a 70 maybe someone else knows. Lee Buffenmyer
Is the 68 and 69 centerstand the same type?[?]