Does anyone have some of the steel expanded metal material to match the exhaust shield on a steel tanker circa 1970/1971? Have found it in 4 x 8 ft size but only need a small piece. Thanks Ted
Ted
Here's a place that I found http://www.mcnichols.com/products/perforated/slothole/
But it's in 3 x 10 and 4 x 8 sheets too.
I am sending a complete 71 bike to Kevin at Circle F this week with stock pipe and he is going to make a pipe for my second bike. I was going to hold off to say anything until it was complete, but since you asked, he should be able to supply complete pipes for the 70/71 steel tankers. If you wait a few weeks, he'll probably have the heat shield material in smaller amounts. Al also has the muffler end, baffle, and springs. I'll keep you posted when it looks like he's getting close to completing the pipe and you can give him a call. Skip
Ted
Here's another option. Once I get the new pipe made for my bike, if you would like, you can have the pipe that came off of it. There might be enough heat shield on it for you to use. Here's a picture of the pipe.
http://i63.photobucket.com/albums/h149/rpage11/DSCN0485.jpg
Skip
I could also use a complete pipe for a '70. Steve
Ted
I sent a couple of replies to your email, but haven't heard back from you. Did you get my email.
Fortek
It will probably be about a month before I see anything. I will try to post a link to pictures of the pipe when I get something Then you can contact Kevin directly.
Skip