Print Page - Ceriani fork dampers

Title: Ceriani fork dampers
Post by: jblack on July 17, 2006, 08:43:56 PM

I took fork dampers outof my 35mm forks and they have been sitting for some time. Along the way, somehow the sequence of parts has been changed around and I can't remember which way they are to go. Does anyone have a diagram or picture for the 75 dampers. On the top there is a nylon bushing,then the stiff ,short spring,then the flat washer valve then a collered alum. piece that holds the small spring,then a short alum. piece, then the larger alum. piece that is milled to have different i.d. Anyone?

Title: Ceriani fork dampers
Post by: Kip Kern on July 18, 2006, 07:13:44 AM

Check out the shop manual, it will have a brekdown.

Title: Ceriani fork dampers
Post by: jblack on July 18, 2006, 09:58:14 AM

If I had one I would. I thought someone might have an exploded view somewhere?

Title: Ceriani fork dampers
Post by: pakala on July 18, 2006, 10:45:24 AM

jblack,
See if this works.Page 5 of 51. http://tinyurl.com/fs7mu
Paul (socal)

Title: Ceriani fork dampers
Post by: jblack on July 18, 2006, 07:13:52 PM

Thanks, That helps. Was there a difference between the dampers on the 1975 models?

Penton Owners Group

General Discussion => Penton Talk => Topic started by: jblack on July 17, 2006, 08:43:56 PM