Print Page - piston, rings n rod kit 4 495

Title: piston, rings n rod kit 4 495
Post by: johnnyrat on August 25, 2006, 08:26:11 AM

hey guys if anyone out there can help me find piston, rings & rod kit for ktm 495 also my 82 495 has ohlins rear shock is this standard ? it has australian compliance plate .on the compliance plate it says its gs 400 all other numbers on engine & frame says its definetly 495.one last thing were there different models in the 82 495 eg mx or road registerable 4 & 5 speed any info would be great thanks boys john townsville queensland

Title: piston, rings n rod kit 4 495
Post by: Big Mac on August 25, 2006, 11:59:35 AM

The wisdom on 495's is at the Unofficial KTM 495 website...go to Home, Links, and click there. For out of the ordinary old bike rods in the US, Euro-rods will have them or will direct you where best to look: [email protected], phone 561-383-8820, fax 561-383-8821. //www.euro-rods.com

Good luck.

Title: piston, rings n rod kit 4 495
Post by: johnnyrat on September 02, 2006, 06:01:45 PM

have got hold of piston kits. tried euro rods and they cannot help me so if anyone nos where to get some conrod kits would be much appreciated thanks

Title: piston, rings n rod kit 4 495
Post by: tofriedel on September 02, 2006, 07:25:42 PM

John,

Try this fellow //[email protected] He is in Europe, not cheap, but may be the only guy who can help you. His name is Reinhard Schrem. He does alot with 495's.

Tony

Title: piston, rings n rod kit 4 495
Post by: johnnyrat on September 03, 2006, 04:48:38 AM

Have tried him he does have them and yes they very expensive. i'll get them off him as a last resort as i'd like to find somewhere cheaper if anyone can help. thanks

Penton Owners Group

General Discussion => Penton Talk => Topic started by: johnnyrat on August 25, 2006, 08:26:11 AM