Print Page - 78 250 Engine Rebuild

Title: 78 250 Engine Rebuild
Post by: Chrisbo on September 19, 2006, 11:16:18 AM

Hi POG,

Can anyone tell me what material the crank seals on the 250 motors are made from or if it matters what material they are e.g. Viton, rubber etc. and secondly where can you get the shims for setting the side clearance on the crank.

Thanks
Chris.

Title: 78 250 Engine Rebuild
Post by: Mike Lenz on September 21, 2006, 06:22:49 PM

Have you tried Al Buehner for the seals...and maybe the shims?

Title: 78 250 Engine Rebuild
Post by: Chrisbo on October 02, 2006, 12:17:44 PM

Thanks for the info Mike, I spoke with Kip and he's sent me in the right direction as have you.

cheers
Chris.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Chrisbo on September 19, 2006, 11:16:18 AM