Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Cliff Cook on September 22, 2006, 09:10:03 PM

Title: Shock Seals
Post by: Cliff Cook on September 22, 2006, 09:10:03 PM
Hey fellas, can anyone tell me of a source for the Marzochi shock seals??  Have searched archives but no luck.  Must be me as I know the subject has been discussed.  Also, I know someone is rebuilding them, but I have several sets of shocks and wish to do myself.  Have done them in years gone by with instructs from a longhaired Dane at the time.  Thanks, Cliff

Title: Shock Seals
Post by: Tony Price on September 23, 2006, 04:00:00 PM
Cliff,

I'm going to be needing some myself in a short while.  I'll let you know if I dig up anything.

Tony
Title: Shock Seals
Post by: Jay Jones on September 23, 2006, 07:53:03 PM
Joe over at Cosmopolitan Motors in Hatsboro,Pa has them and so does'nt Domiracer in Cincinatti,Oh ask Tom or John they wil know?Do you have #2#3#4 with 10mm or 12mm shafts?Ducatis and Laverdas had same shocks.Jay:)
Title: Shock Seals
Post by: Cliff Cook on September 23, 2006, 11:21:09 PM
Thanks Jay and Tony.  Have done business with John at Domi before.
Cliff
Title: Shock Seals
Post by: behindbars on September 24, 2006, 07:57:05 AM
Anyone know where to get a set of seals for a set of Koni shocks?

James Jorgensen
Red Bud, Michigan
74 1/2 Mint Enduro
74 1/2 Mint MX
74 Scrambler 250
Title: Shock Seals
Post by: Tony Price on September 24, 2006, 08:04:44 AM
I didn't know Konis were rebuildale??????

Tony
Title: Shock Seals
Post by: behindbars on September 24, 2006, 09:15:43 AM
Hi Tony. I'll have to go look again as it's been awhile since I checked, but if my poor memory is working [xx(]it seems that the seal head looked to be removable.

James Jorgensen
Red Bud, Michigan
74 1/2 Mint Enduro
74 1/2 Mint MX
74 Scrambler 250
Title: Shock Seals
Post by: checkcrew on September 24, 2006, 09:55:35 AM
James and Tony, i just looked at the Konis on my Steel Tanker and the seal head looks like it should unscrew, i have seen many times posts looking for Koni shock rebuild kits with no replys, maybe a seal house ??, hope this helps, regards, Mike G.

Mike Gallagher, Camden County, NJ. - 71 Six- Day 125 Steel Tanker, 2- 1972 Six-Days, 73 Six-Day, 73 Jackpiner, 75 Mint 400, 76 MC5-400
Title: Shock Seals
Post by: Jay Jones on September 24, 2006, 11:00:53 AM
Koni is still in business out in california.A few years ago I called them and the fella out there told me they are exclusivly are doing shocks for offroad baja type vehicles so they did have still a spanner tool and seals to sell me.I would check a local BMW dealer too,as they had a lot of Koni shocks.Joe over at Cosmo may have seals too?There were rear shocks being sold a few years ago to Bmw guys called IKON shocks there Koni copys and may have same seals and spanner tool for seal removal check into it ?Jay:)
Title: Shock Seals
Post by: harrO on March 18, 2010, 09:41:40 PM
Some time has past since these postings...Has anyone current info on Koni shock rebuild kits/parts or internals that may be interchangeable for the Koni shocks on my '69 steel? Thanks,  Harry
Title: Shock Seals
Post by: thrownchain on March 18, 2010, 10:46:53 PM
These guys are on E bay as Koni rebuilders: phone #  724 285 6202, or 724 256 8908. Call'em and see if it works for you.
Title: Shock Seals
Post by: garrettccovington on March 18, 2010, 11:48:12 PM
Don't want to steal the thread, but since we are on rear, shocks, anybody know who rebuilds Bilstein's, if they are rebuildable.

G

72 six-day
79 KTM MC80 250
Title: Shock Seals
Post by: harrO on March 19, 2010, 10:19:30 PM
Thanks for the lead Thrownchain. I'll give those guys a call.  Harry
Text only | Text with Images