Print Page - Spark Plug and Rim Locks for Six Days

Title: Spark Plug and Rim Locks for Six Days
Post by: jay cohen on October 28, 2006, 10:43:27 PM

Is the recommended plug for a '72 125 Six Days the B8HS? I have the Radelli steel wheels with all the little knobs on the inside. Should I drill it out to add a rim lock also? I plan to use the bike for mx and cross country stuff, don't know if the knobs would do the job alone. Thanks again for any suggestions, I can't begin to tell you how helpful this group has been. My restoration is going well. I was hoping it would keep me busy over the winter, but I may have it all done before winter. Just got the wheels back from the powder coater today and need to order the spokes Monday. Jay

Title: Spark Plug and Rim Locks for Six Days
Post by: Merlin on October 29, 2006, 06:08:41 AM

............by all means use the B8HS plug,gap at .020 inch. The rim nubs were a good idea until they wear a bit then the tire will creep on the rim,I would suggest strongly to install a quality rim lock.........

Title: Spark Plug and Rim Locks for Six Days
Post by: jay cohen on October 29, 2006, 07:20:21 AM

One on the front and one on the rear?

Title: Spark Plug and Rim Locks for Six Days
Post by: Merlin on October 29, 2006, 08:29:25 AM

............yes,one each..................

Penton Owners Group

General Discussion => Penton Talk => Topic started by: jay cohen on October 28, 2006, 10:43:27 PM