Print Page - PJ1 Frame paint questions

Title: PJ1 Frame paint questions
Post by: t20sl on November 09, 2006, 10:12:47 AM

I have never used this how does it hold up to spilled gasoline? Which color KTM Grey or silver is closest to the steel tank frames? Thanks, Ted

Title: PJ1 Frame paint questions
Post by: Doug Wilford on November 09, 2006, 08:20:39 PM

Ted;
The PJ-1 KTM Silver Gray Epoxy is a perfect match to the original frame color. It also holds up very well to gas etc. Just remember to scrape the paint off your coil and engine mounts.
Have Fun!

Title: PJ1 Frame paint questions
Post by: gooddirt on November 09, 2006, 10:04:15 PM

I would have to say for a rider the paint is great ,for a show bike go with a PPG paint match. The PJ1 out here in the west is not a good match for a show bike ,its what you get for a $6.95.Maybe they mix them wrong out here .Depends on how close you want the match.[8D]

Title: PJ1 Frame paint questions
Post by: Bill Campbell on November 11, 2006, 07:38:22 AM

i've always mean't to ask is the PJ1 called KTM silver grey epoxy and is this the same colour for 73 to 77 frames. I also think that the engines are a straight silver Can you tell me a popular can brand for painting engines. Probably won't get here in Oz but its worth a try. Cheers Bill

Title: PJ1 Frame paint questions
Post by: Doug Wilford on November 11, 2006, 12:18:49 PM

Sachs engine Paint, Duplicolor DE1650 Cast Coat Aluminum Engine Enamel Ceramic 500 Degree

Title: PJ1 Frame paint questions
Post by: Mick Milakovic on November 11, 2006, 07:39:28 PM

Doug, are the KTM motors the same color?

Title: PJ1 Frame paint questions
Post by: t20sl on November 14, 2006, 07:01:43 AM

Thanks everyone. Ted

Penton Owners Group

General Discussion => Penton Talk => Topic started by: t20sl on November 09, 2006, 10:12:47 AM