Print Page - Straight Cut Gears for a 125 B motor?

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on November 14, 2006, 10:30:17 PM

I have heard there have been some cut over the years. Anyone have a set collecting dust?

Title: Straight Cut Gears for a 125 B motor?
Post by: Lew Mayer on November 15, 2006, 02:06:46 AM

Contact John Durrill. He may know of a set not spoken for.

Lew Mayer

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on November 15, 2006, 07:24:08 PM

Thanks Lew. I got another lead too!
TB

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on December 16, 2006, 09:09:59 AM

I did find a person that had 10 sets made. Anyone looking for them?

Title: Straight Cut Gears for a 125 B motor?
Post by: tlanders on December 17, 2006, 02:26:28 PM

Tom,

I am glad you have hooked up with JP, I do believe he has the sachs shifting solution. Now with the straight cut gears also, it should be sweet.

Teddy

Title: Straight Cut Gears for a 125 B motor?
Post by: Lew Mayer on December 17, 2006, 04:12:55 PM

How much? I just had to ask.[:p]

Lew Mayer

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on December 17, 2006, 09:09:04 PM

Lew,

You've got mail.
TB

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on December 18, 2006, 12:04:14 AM

Thanks for that info Ted. See you in Arizona???

Title: Straight Cut Gears for a 125 B motor?
Post by: tlanders on December 18, 2006, 11:03:09 AM

I sent you a reply to your email and it was returned as spam!!! I wrote:

Merry CHRISTmas to you and your family also. Arizona is always
problematical. If I am in the area for business, then I can go. Gatorback is in the plans. I can't wait to see you fly with a Six Day that shifts!!!!!

Teddy

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on December 18, 2006, 10:25:38 PM

Thanks Teddy,
We dropped AOL and went Comcast so I am missing a few e-mails. I hope Gatorback is in the mix for me too. Never really know until a few weeks out.

I hope it shifts too. Its always a challenge to run with those Elsinores on that flat track I call the Arizona Freeway.
Tom B

Title: Straight Cut Gears for a 125 B motor?
Post by: pentons4evr on March 10, 2007, 08:02:36 AM

I would be interested in a set.I traded the only set I had to paul danik a couple of years ago.

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on March 10, 2007, 08:38:45 PM

Penton4ever
You've got mail!
Tom Benolkin

Title: Straight Cut Gears for a 125 B motor?
Post by: VICTOR MONZ on March 10, 2007, 10:23:52 PM

Tom:

Could you fire me the info also on the straight cut...I plan to trip to San Fran. this summer to meet JP.

Any assistance would be greatly appreciated.

Thanks

Victor Monz

[email protected]

PS. MB and I have purchased a "gram scale" for our new project...thanks for the tip, I also lost 6 lb. myself !

Title: Straight Cut Gears for a 125 B motor?
Post by: bentrims on March 11, 2007, 09:28:56 PM

Victor,
I will mail you info. Six pounds on the body is probably worth 20 off the bike!
TB

Title: Straight Cut Gears for a 125 B motor?
Post by: Okie on August 11, 2007, 12:04:54 AM

What gears are you talking about?
Thanks
Okie

Have fun and the day will take care of it's self.

Title: Straight Cut Gears for a 125 B motor?
Post by: Paul Danik on August 12, 2007, 06:58:27 AM

Okie,

The gears in discussion are the driving pinion gear and gear that it drives on the clutch of the 100/125 Sachs engine.

Paul

Penton Owners Group

General Discussion => Penton Racing Talk => Topic started by: bentrims on November 14, 2006, 10:30:17 PM