Print Page - Wanted

Title: Wanted - RIM
Post by: imported_n/a on January 14, 2007, 08:45:42 AM

Will pay top dollar for nice WM2 x 18 x 36 hole shouldered Akront drilled (6mm) for smaller dia. nipples for a standard full hub from 74 Six Day. I know they're hard find so I'm willing to go high. I also have a very good left side OEM number plate from a 74 CMF and a re-usable 21" Radaelli I'll throw in for the correct rim if needed or will pay all cash if these parts are not wanted. As a last resort I'll also consider WM3 in same size all around. Thanks for your consideration,

Chris H.

Title: Wanted - RIM
Post by: G Ellis on January 14, 2007, 07:02:15 PM

Chris the rim I sent you was it the right one? If not let me know. Gary

Title: Wanted - RIM
Post by: imported_n/a on January 14, 2007, 08:19:46 PM

Hey Gary, you have email. I'll try to call you. It's all good!

Chris H.

Title: Wanted - RIM
Post by: rpage11 on January 15, 2007, 08:30:54 PM

Chris
Here's a few places you can try. I think I got the same thing your asking about from Buchanan's last year.

http://store.eastcoastwheels.com/rims.html

http://www.buchananspokes.com/

http://www.speedandsport.com/flyer.html#exh

Good luck Skip

Skip Page
Tucson, AZ

Title: Wanted - RIM
Post by: thrownchain on January 15, 2007, 08:40:37 PM

Try Hugh's Bultaco also. or //www.cosmotor.com. they advertise alloy rims. Doesn't hurt to ask.

Title: Wanted - RIM
Post by: thrownchain on January 21, 2007, 09:08:01 AM

Ackront rims on E play, in Penton section .[^]

Title: Wanted - RIM
Post by: imported_n/a on January 21, 2007, 10:00:45 AM

thanks for the replies! got a few bites from POG!

chris h.

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: imported_n/a on January 14, 2007, 08:45:42 AM