Print Page - wheel puller

Title: wheel puller
Post by: Steve Minor on October 09, 2001, 01:47:27 PM

What sort of a wheel puller is required to access the motoplat system on a '77 400 gs6? And, is the retaining nut reverse threads?

Thanks, Steve

Title: wheel puller
Post by: skipperclyde on October 09, 2001, 03:12:34 PM

Contact the following:

Alan Buehner
5818 Detroit Ave
Cleveland, Ohio 44102
Phone: 216-651-6559
Fax: 216-651-1620

He should have the puller and the information you need.

Title: wheel puller
Post by: john durrill on October 15, 2001, 10:55:25 PM

Does anyone Know if Alan Buehnen has an E-mail address?
i know I will need some parts soon. 175 piston amd rings probably
John

Title: wheel puller
Post by: metalkfab on October 16, 2001, 09:45:54 AM

John,Al doesn't have e-mail yet,you can e-mail me and I'll forward to Al.( I see him weekly).

Title: wheel puller
Post by: john durrill on October 16, 2001, 10:23:38 AM

Thanks metalkfab,
I need the two protective caps used to pull the fly wheel and the countershaft sprocket.
A flywheel puller for the bosh mag and the motoplat. all are for the Sachs engine
John D.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Steve Minor on October 09, 2001, 01:47:27 PM