Print Page - SACHS PARTS TO TRADE/SELL

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 17, 2007, 01:30:26 PM

I aqquired 3 SACHS 125 parts bikes that i have no use for.i early iron barrel bike(motor already spoken for),and 2 alloy barrel bikes- pre 73? (non slab sided tanks).If anyone needs anything let me know and i'll see if i have it.Thanks,
Ric

P.S.-Would,of course like to swap for Penton stuff.Note these are Sachs 125 NOT steel tanker Pentons-Thanks,i should have been more clear.
ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: pakala on March 17, 2007, 05:58:12 PM

Ric,
Do you have a dent and rust free Tank? Also could use a good kickstand.
Paul(socal)

Title: SACHS PARTS TO TRADE/SELL
Post by: checkcrew on March 17, 2007, 07:22:53 PM

Ric, hi, looking for the pipe guard, mine is a 71 and has the mesch material similar to the Steel Tanker, 3 small screws hold it in place, let me know, thanks, Mike G.

Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72, 73, 74, 125-6 Day's, 73 Jackpiner, 73 Yellow Tank 250 H/S

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 18, 2007, 06:55:22 AM

Mike and Paul,I'll sort thru this stuff today and let you know what i have.Thanks,
P.S.-I picked up the rest of this stuff from a closed down shop so i have lots of cases,cyls.,heads etc.-i'll be going thru it and picking out what i'll keep and offer up the rest. Ric
ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: thrownchain on March 18, 2007, 09:14:57 AM

If you've got one, I could use a good "full" fin cylinder for my '74 Six Days. I also need a carb for my '72 Six Days. thx Dan

Title: SACHS PARTS TO TRADE/SELL
Post by: kaferacer on March 18, 2007, 08:38:43 PM

Ric,
I could use an uncut head and any down pipes. thanks. Kaferacer.

Hugh "Mac"Donald
(Kermac Vintage Motorcycles)

1972 Penton 125mx
1973 Monark 125mx
1972 Aspes 125mx
1971 Dalesman 125mx
1971 Sprite 125mx
1972 Tyran 125mx
1973 Premier 125mx
1974 Alouette 125mx

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 19, 2007, 12:14:20 PM

Paul-i have a kickstand,All the tanks i have are not perfect-the best one i have has a 50 cent piece sized ding in it and will need paint,rust wise it looks ok.Let me know if you're interested.
Mike,no gots on the pipe guard,the guy who i got this stuff from is putting a whole pipe on ebay with that kind of heat shield though so keep an eye out.
Dan and Hugh,I'll look for heads tonite and see whats there.

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: thrownchain on March 19, 2007, 06:02:27 PM

Ric, I need a cylinder, not a head. I've got a couple of full fin heads, need the cyl. thx Dan

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 19, 2007, 06:46:10 PM

Dan,I know,but i was typing in a hurry and my finger and brain shorted out!I'll look tonite.Later,Ric

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 19, 2007, 08:22:26 PM

Mike,Dan,And Hugh-You have mail.

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: BobJones on March 21, 2007, 10:53:05 AM

I need a right side engine cover for my 68. The one I have had a chain go through it. I was going to weld it but it will take a lot of build up. Does anyone know if they are the same? Thanks Bob.

Bob Jones
Show-me state
(2)74 Harescramblers,72 Jackpiner,68/69 6-Day,73 Harescrambler.

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 22, 2007, 05:22:02 PM

Bob,I have one 4 u!
ric

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: Lew Mayer on March 22, 2007, 06:52:58 PM

Ric,
Do you have another rt side cover?

Lew Mayer

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 23, 2007, 11:48:23 AM

Guys,I've been a little slow in returning emails but i believe every request is now answered.i'll be separating the stuff and boxing it up sunday.please be specific as far as condition of item you are needing-(i.e. for restoration or rider,as new,good used,cosmetically good or not,etc.)
Thanks for your patience and as i said before i'm always up for trading as opposed to selling outright.
Ric

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: MattyQ on March 26, 2007, 10:35:20 AM

Do you have any Moto Plat assemblies for a 1974 125 six day .

Matthew Quinlan

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 26, 2007, 11:47:08 AM

Guys,I found everything that you asked for yesterday and will try and email you with details today if not real busy at the shop,or tonite when i am at home.Matty Q.-i'll have to check on the motoplat when i get home.Thanks,
Ric

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on March 28, 2007, 07:17:22 PM

All emails are answered(as far as i know-if not try me again)and parts are ready to send-need a few addresses and replies.Thanks,Ric

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: imported_n/a on April 14, 2007, 12:46:58 PM

Hi Ric, you have email!

crheeterman

Title: SACHS PARTS TO TRADE/SELL
Post by: MattyQ on April 16, 2007, 01:25:32 PM

Were you able to locate a motoplat assy?

Thanks ,

Q

Matthew Quinlan

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on April 16, 2007, 03:23:17 PM

Matty,I have a few,but as i said i need to make the time to either try them on a bike or send a box of them to Dane to be tested.I'm leaning on just sending them all to Dane to seperate good from marginal to bad ones.If you find one in the mean time by all means get it.I haven't been able to make time to sit down and test them on a bike,between work and other issues.Thanks,Ric
I apologize for being slow in getting this stuff taken care of-60+ hour work weeks and battling a heath issue has put me behind the 8 ball.Sorry.
ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: MattyQ on April 17, 2007, 01:09:46 PM

Ric , didn't realize they had to be tested. I am not in a big hurry to get one. Sorry to hear your having health problems , hopefully nothing serious.

Q

Matthew Quinlan

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on April 17, 2007, 03:43:00 PM

Matty,I just want to make sure you get a good one-as soon as my bike is running i can try one on it.Or,as i said i may send all the ones i have to Dane to check them out on his machine.
Ric
P.S.-A motoplat went on ebay today-79.95 starting bid-not mine,but seller claims it's good.

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: nedpepper on April 18, 2007, 09:50:05 PM

I have an old style Sachs motocrosser and i need a kicksarted. Do you have an extra one?

Title: SACHS PARTS TO TRADE/SELL
Post by: sixdazed on April 22, 2007, 04:24:02 PM

Nedpepper-i have one-if you still need it shoot me an email with your address.Ric

ric emmal

Title: SACHS PARTS TO TRADE/SELL
Post by: nedpepper on April 22, 2007, 09:32:45 PM

Ric. My email address is [email protected]

Nedpepper-i have one-if you still need it shoot me an email with your address.Ric

ric emmal
[/quote]