Print Page - 1 vs. 2 petcocks

Title: 1 vs. 2 petcocks
Post by: chuck on March 25, 2007, 08:20:27 PM

Are there any venting issues or any other problems if I go from 2 petcocks to 1 petcock.

I was going to plug it with a bolt and need some advice on a good sealent. I was thinking of using P&J weld but am afraid I may not be albe to remove it.

Thanks for the help.

chuck

Title: 1 vs. 2 petcocks
Post by: Mike Lenz on March 25, 2007, 11:02:27 PM

I use one and epoxy up the other side with a cap filled with it. The red plastic caps they put on small oxygen bottles, when filled, fit nice. If your running a good running 250 or 400 I would advise using the 78 larger flow petcock. Been doing it for years on my MX bikes. Works fine.

Penton Owners Group

General Discussion => Penton Talk => Topic started by: chuck on March 25, 2007, 08:20:27 PM