Looking for a SACHS ID plate that reads; 100/5A. Will purchase outright or trade for?
Thanks
marc
I need a 100/6B plate. How would you rivet it back on ?
Dwight
Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.
Mark , Dwight
Try the Hammers in Germany. They showed the plates and rivet's
in-stock last time we asked.
http://www.motorrad-klassiker-ersatzteile.de/
Or try the folks here. They should be able to tell you where to find them.
http://www.herculesig.de/
Dwight , Leo should know if anyone does.
John D.
John,
Thanks. Will do.
marc
Tried the Hammers. They said they only have parts for the 125 and 180 5 speed engines ( Military ).
Dwight
Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.
There is a place in Ft Wayne IN that can make them, just have to justify the up front $$$$$$$. Looking into having 14mm and 17mm Kick Starter shafts made now and that is big $$$$$$$$
Hi Kip,
WHAT KIND OF MINIMUM IS REQUIRED AND WHAT IS THE PRICING, TIME FRAME, ETC?
ON THE BOTTOM OF THE 125CC ID PLATE I HAVE IN HAND, IT READS;
TYPE SACHS 1251/5A
WOULD THE TAG ON A 100CC SACHS READ;
TYPE SACHS 1001/5A OR TYPE SACHS 100/5A?
Thanks
Marc
You guys arn't planning on sandbagging the 100 class are you?
Marc,
It would be 1001/5A.......I found one. You have email.
Ron Carbaugh
Ron, Do you have a 100/6B plate or cover ? My 100 has a 125 side plate for some reason. Actually I have 2 100cc engines and BOTH have 125 side covers.
Dwight
Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.
Dwight,
I have several of the covers with the 1001/6B plates, but I hope to rebuild the engines someday and want to have the proper ID plate to go on the correct engine. I had to buy the cover/ID plate that Marc wanted.
Ron Carbaugh