>
Double-sided 14mm '73-'77 KTM shift shaft and shift quadrant. *SOLD* From a '73 motor, shaft protrudes through knockout on motor rt. side behind sprocket, for right shifting option, ie: flattrack. Good splines. $35
>
Alloy 20" long seat base *SOLD* and rough foam, rough hardware. Very good cond. base, needs glue clean-up, still has the edge welting for cover protection. Came on '75 250 and has '75-style hardware, but fits both '74-'75 Harescrambler and MC5 frames and attachment points. Foam is 4-3/4" hi at front, 6" at rear (long, tall?), has some divots, flaking, a split, but could be used if fixed up and you're not real picky. Hardware solid but rusty. $95
>
Double-leading shoe front brake *DIBS CALLED* backing plate and shoes, '84 KTM. Adapt to your Evolution-class MC5 or 420/495 and stop like a Yamaha. $40
>
CEV headlight brackets *SOLD* for 35mm forks. $25
>
MC5 seat hardware, good cond., needs paint. $15
>
Airboots, new repops, 50mm x 70mm openings x 70-72mm long; one offset
*SOLD* ; one straight reduction--'76-'79 250/400s? Have part #'s I can send. $20 each.
Can send pics, please e-mail with questions or to call dibs. Can take Paypal, will ship. Thanks,
[email protected] Jon McLean
Lake Grove, OR
Jon,
If no one has stepped up, put me down for the double sided shifter shaft for my KRP project. I had forgotten who had one......my bad. Are you going to the POG metting next Saturday? Mike
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
Jon.....I need one of the air boots for my 77 400 GS6 if it will fit. Would you please send me a part number of the ones you've got? A picture would be great if possible.
"Airboots, new repops, 50mm x 70mm openings x 70-72mm long, one offset, one straight reduction--'76-'79 250/400s? Have part #'s I can send. $20 each."
Thanks
Steve Minor
Wilmington, NC
Jon, hi, i will take the 35mm headlight ears if they are not spoken for, let me know, thank you, Mike G. from NJ.
Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72 x 2, 73 x 2, 125-6 Day's, 73 Jackpiner, 75 - 250 H/S, 74 1/2 Mint 400
Mike W.- Sent you an e-mail. Shift shaft set aside for you. No POG meeting for me...it's like 2200 miles away from me and I'd be late to work on Monday, even if I drove fast.
Steve- Sent you an e-mail, the offset should fit, will send a pic if you'll send your e-address. Holding it for you.
Mike G- Gary Ellis made an early a.m. dibs call on the headlight ears. If he changes his mind, will let you know.
Thanks guys,
Jon McLean
Lake Grove, OR
Jon...I got your email and replied...thanks. Looks like you've got what I need.
Steve Minor
Wilmington, NC
Jon, hi, i will take the 35mm headlight ears if they are not spoken for, let me know, thank you, Mike G. from NJ.
Mike Gallagher, Camden County, NJ. - 70 + 71, 125 Steel Tankers, 72 x 2, 73 x 2, 125-6 Day's, 73 Jackpiner, 75 - 250 H/S, 74 1/2 Mint 400
Mike W.- Sent you an e-mail. Shift shaft set aside for you. No POG meeting for me...it's like 2200 miles away from me and I'd be late to work on Monday, even if I drove fast.
Steve- Sent you an e-mail, the offset should fit, will send a pic if you'll send your e-address. Holding it for you.
Mike G- Gary Ellis made an early a.m. dibs call on the headlight ears. If he changes his mind, will let you know.
Thanks guys,
Jon McLean
Lake Grove, OR
Jon...I got your email and replied...thanks. Looks like you've got what I need.
Steve Minor
Wilmington, NC
Jon was wanting to know if you have shipped the headlight ears? Email me at
[email protected] Later Gary