Hi , thought I properly stored my 6B engine , apparently not. Messed up and pushed down on the kick starter by hand , didn't sound good. I think it's now locked up! I am not knowledgeable about pistons and cylinders, just how to break them . Is there a standard size for the hex nut on the cylinder? I do not think I have one that size . thanks , Matt
Matt, 10mm hex key. If engine is out of bike access is not a problem. If engine is in bike, you will need a short extension to clear the fins but not bind up under the frame tubes. I use a 2 inch long "wobble" extension. I'm in Chattanooga. If you can afford fuel, load'er up and come for a visit. I'm good at taking things apart :D
[email protected]Ernie P.
Chattanooga, TN
Ernie , I appreciate the offer ! I will try to set something up in the near future, have summer vacation with the family coming up soon ! These gas prices are putting a cramp in my style ! Will be in touch , thanks Matt