Anyone need a 56 tooth sprocket or set of foot pegs? Bought them for a steel tank and the sprocket does not seem to fit and went a different way on the pegs. Thought I would ask here before they go on Ebay. The sprocket is a PBI and has a nice gold color on one side and aluminum color on the other.
71 steel tanker project
Hello tvrc18, I may be interested in the sprocket and the pegs also. Are the foot pegs for a 73 Berkshire as well? I need a rear sprocket for my 73' Berkshire, and I can use the foot pegs on an other bike project if they are for the CMF frame. Thanks for any help, Crash Carden [8D]
Hi Crash, I ended up using the sprocket, I had to modify it a bit to fit. It would not fit on the hub so a small bit of dremil with sand paper and it finally went on the hub. I can send you a picture of the pegs if you want, they are off a 73 Berkshire I believe. I thought the sprocket was different but after looking at Al B. web site they are the same for 68 to 73 I think. Send your email address and will send a picture of the pegs.
[email protected]
The foot pegs are all the same, if I am not mistaken.
Tony
Just a note here. The Early 1968 Steel Tanker had a different hub than the later 69-71, as they were a 4 hole drive. Foot pegs were different on the ST vs the CMF bikes. The 72 on pegs were the same.
Donny Smith
Paragould, AR
Hi Crash, I ended up using the sprocket, I had to modify it a bit to fit. It would not fit on the hub so a small bit of dremil with sand paper and it finally went on the hub. I can send you a picture of the pegs if you want, they are off a 73 Berkshire I believe. I thought the sprocket was different but after looking at Al B. web site they are the same for 68 to 73 I think. Send your email address and will send a picture of the pegs.
[email protected]
The foot pegs are all the same, if I am not mistaken.
Tony
Just a note here. The Early 1968 Steel Tanker had a different hub than the later 69-71, as they were a 4 hole drive. Foot pegs were different on the ST vs the CMF bikes. The 72 on pegs were the same.
Donny Smith
Paragould, AR