In need of a good used or nos ; or trade a nos -B- motor insert, ( for moto- plat wire in the right center case slot ) thanks. LG
Larry,
Here is what I use in my "D" Sachs engines.
-------------------------------------------------------------------
B- #0665-124-000 - $1.50 each
for Motoplat ignition wire
fits "B" engine cases with slot
--------------------------------------------------------------------
Al should have them in stock. They are the same as the "B" unless I am missing something.
Ron Carbaugh
Ron, the -D- or late -B- has a step down and a larger slot , I found a NOS sachs 80 insert that will have to do for now; they are the same shape. Thanks LG
Larry,
I understand, but a B will work with a little work and I find that if people have stock of these that you can ask them to look and explain the difference. I trim them with a razor blade and it works. I guess I should have explained myself a little better in my first post.
Ron Carbaugh
Ok, If I slide the B insert at the bottom edge of it seems to work fine with no razor cutting needed, just a dab or silicone .:D:D:D
Larry,
I hoped that helped. I hope all is well in the Great Northwest.
Ron Carbaugh