Text only | Text with Images

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Mike Berrington on August 06, 2008, 03:25:02 PM

Title: Wanted - engine braces for 73 Jackpiner
Post by: Mike Berrington on August 06, 2008, 03:25:02 PM
I am still look for a pair of the round tube reinforcement braces that angle forward from the frame to the top of the engine.  Part number if that helps # 52.03.045.000 & 52.03.145.00

Thanks for your help


Mike Berrington
Waynesboro VA.
73 Jackpiner, 77 GS6 175
88 YZ250,  03 YZ450F
Title: Wanted - engine braces for 73 Jackpiner
Post by: Mike Berrington on August 27, 2008, 09:22:23 PM
Still looking for the round braces, the last pieces I need to complete the bike... I believe the braces are the same for all of the KTM motors that used the round braces through 1974?

Has any one tried to make them out of round tubing?

Mike Berrington
Waynesboro VA.
73 Jackpiner, 77 GS6 175
88 YZ250,  03 YZ450F
Title: Wanted - engine braces for 73 Jackpiner
Post by: KJDonovan on September 01, 2008, 09:07:30 AM
Mike,

I went through my spare parts locker and found 1 brace that was attached to a junk engine.  Its yours for postage send me your address and I will mail it to you.

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)
Text only | Text with Images