Print Page - Allen Head, Cylinder Head Nuts

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 17, 2008, 07:00:41 AM

Anyone out there in POG have any luck finding a jobber that carries the cylinder head allen nuts for the 76 up KTM engines? I tried my sources but to no avail. I know they are out there as I saw an engine with new manufactured (just can't remember who owned it!) Al is out. Thanks in advance;)

Title: Allen Head, Cylinder Head Nuts
Post by: Mike Berrington on September 17, 2008, 01:46:59 PM

Try McMaster Carr...I did not look but they have always amazed me with what they have ... crank shims, blue nylon lock nuts, rubber sheet for flaps etc....
http://www.mcmaster.com

Mike Berrington
Waynesboro VA.
73 Jackpiner, 77 GS6 175
88 YZ250, 03 YZ450F

Title: Allen Head, Cylinder Head Nuts
Post by: Steve Minor on September 17, 2008, 03:57:03 PM

Kip....I don't know if they stock that size, but you might try this vendor too.

http://www.boltdepot.com/

Steve Minor
Wilmington, NC

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 18, 2008, 09:01:18 AM

Thanks, I'll give em a try!

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 19, 2008, 07:00:03 AM

No luck, will try out of country, possibly have a chance find.

Title: Allen Head, Cylinder Head Nuts
Post by: firstturn on September 19, 2008, 09:37:54 PM

Kip,
I do not have any setting around in a head...send the size and I will look in my used bolt bin.

Ron Carbaugh

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 20, 2008, 10:56:56 PM

Ron, 32mm long, 10mm allen socket made by "Bauer" (8mm x 1.25 thread goes through the entire fastener). I have an inquiry in Canada from a metric supplier (same place I found the 1mm x 16mm cotter keys for the clutch nuts). May end up with 100 each but I think they would sell as these are hard/impossible to find.;)

Title: Allen Head, Cylinder Head Nuts
Post by: gooddirt on September 21, 2008, 01:13:48 PM

Have deleted my last posting response [B)][B)]

Title: Allen Head, Cylinder Head Nuts
Post by: firstturn on September 21, 2008, 10:12:16 PM

Kip,
I found 4 32mm length with a 10mm allen head. I also had some other head bolts in there. I will ship them tomorrow priority mail.

Ron Carbaugh

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 22, 2008, 06:58:57 AM

Let me know what I owe and I'll be happy to pay you bro!

Hopefully will be able to get these through Canada also;)

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 22, 2008, 12:08:39 PM

Bad news, none in Canada. Will try Germany/Austria next. Keep on truckin!

Title: Allen Head, Cylinder Head Nuts
Post by: firstturn on September 22, 2008, 06:59:39 PM

As we say in Texas...bolts are in the mail.

Ron Carbaugh

Title: Allen Head, Cylinder Head Nuts
Post by: Kip Kern on September 25, 2008, 12:06:18 PM

Ron, Received the allens today, thanks so much!:D

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Kip Kern on September 17, 2008, 07:00:41 AM