Print Page - Wanted 100 cc Head and Cylinder

Title: Wanted 100 cc Head and Cylinder
Post by: G Ellis on October 06, 2008, 11:19:08 PM

I am in need for a 100cc Sunburst head and cut cylinder for an side pipe. I need this to put my steeltanker together. I have a good 100cc, cut head for an up pipe and a full find cylinder to trade. I don't want to cut this cylinder if I don't have to. Thanks for the help Later Gary Ellis

Title: Wanted 100 cc Head and Cylinder
Post by: fosterboy on October 07, 2008, 01:35:59 AM

Hello I have a 100cc cylinder with the fins cut on the side that I was going to list on ebay. The cylinder has some ports milled into the cylinder I believe above the intake port I don't know if you are interested in this cylinder but if you want I can take pictures and send it to you send me you e-mail address. Ed

1969 125 Penton 70 to 73 Penton's four project bikes

Title: Wanted 100 cc Head and Cylinder
Post by: clayman on October 07, 2008, 09:06:39 AM

Hi Gary,

I have a complete 100cc Berkshire motor with the cutaway fins on the cylinder and radial head. It has electronic ignition and was pulled from a complete bike (1972 Berkie)last week. Has all cables still intact, including throttle and stock Bing carb. I was going to list it on POG today, in fact. Very nice motor with kicker and shifter. Photos available upon request.

Sincerely,

Clay

Title: Wanted 100 cc Head and Cylinder
Post by: G Ellis on October 07, 2008, 10:41:28 AM

email me at [email protected] or give me a call 217 260 0237 my cell number. Thanks Gary

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: G Ellis on October 06, 2008, 11:19:08 PM