Print Page - Fork tube removal

Title: Fork tube removal
Post by: Steve Minor on December 17, 2001, 08:11:09 AM

I'm assuming (I know that's dangerous) the fork tubes on my 77 400 GS6 have a taper.....should I remove them in an upwards direction or downwards?...(the fork legs are already removed)....Thanks, Steve

Edited by - steve minor on 12/17/2001 10:10:40 AM

Title: Fork tube removal
Post by: DKWRACER on December 17, 2001, 09:30:16 PM

Steve, the only legs that I know about are earlier Ceriannis
(typo)
70 thru 74 are equipped with tapered tubes, my 75 175 and all my later bikes have straight tubes thru the upper triple tree clamp

Title: Fork tube removal
Post by: john durrill on December 17, 2001, 10:09:10 PM

Steve,
If the top of the fork tube is tapered ( has no pinch bolts in the upper tripple tree) the tubes will drop down , to be removed.

Title: Fork tube removal
Post by: Steve Minor on December 18, 2001, 07:27:46 AM

Thanks guys....Guess I was wrong to assume they were tapered.....in fact they are uniform...they were just stuck and seemed to be tapered. I'm glad to report that I have located, thru a fellow POG member, 2 non-rusty fork tubes that I will be installing after Xmas....

Thanks to all
and Happy Holidays
Steve

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Steve Minor on December 17, 2001, 08:11:09 AM