Text only | Text with Images

Penton Owners Group

General Discussion => Penton Talk => Topic started by: Koen Cuypers on December 08, 2008, 07:08:35 AM

Title: Nuts and studs for 125cc sachs cylinder & head.
Post by: Koen Cuypers on December 08, 2008, 07:08:35 AM
Hello, has anyone following dimensions of bolts? It is for the confirmation of the cylinder head with some SACHS 125 models with aluminum cylinder.
Part: Alluminum head /cylinder M8 nuts #0642 107 001
How long are the studs that I need it for this cylinders?
Is it possible M8 x 107cm?

Thx, CK


Title: Nuts and studs for 125cc sachs cylinder & head.
Post by: ALB on December 08, 2008, 08:44:44 AM
The studs measure 8 x 106mm. 107mm will also work.

Alan Buehner
Title: Nuts and studs for 125cc sachs cylinder & head.
Post by: Koen Cuypers on December 08, 2008, 04:45:19 PM
:)Thanks!

Has anybody a picture exactly how the nuts look (with any size)?
I mean here the nuts with internal M8 screw thread for the assembly of the alu cylinder head.

CK
Title: Nuts and studs for 125cc sachs cylinder & head.
Post by: Kip Kern on December 09, 2008, 02:26:59 PM
Koen

Send an address and I'll send a set!  Kip
Title: Nuts and studs for 125cc sachs cylinder & head.
Post by: Koen Cuypers on December 30, 2008, 03:18:18 AM
Hi Kip, the nuts are arrived well!!
Thanks, CK
Quotequote:Originally posted by kip kern

Koen

Send an address and I'll send a set!  Kip
Text only | Text with Images