Print Page - Part needed for a '81 250GS

Title: Part needed for a '81 250GS
Post by: Dave Withrow on January 04, 2009, 04:50:59 PM

Hi all,
I'm looking for an air box to carb air boot for a '81 250 GS. Al said he's out and I understand the place in Australia is currently rebuilding. The part # is 5508026500. Any help is appreciated. Thanks!

Big Dave

Title: Part needed for a '81 250GS
Post by: marsattacks on January 06, 2009, 08:07:46 PM

Google "KTM Klassiker". Might be a little spendy and take some time to deliver but should work for you.I'm on a blackberry so can't give you a link. Good luck! John

click here to see Mars attack)
http://www.ufodigest.com/news/0208/images/marsattacks.jpg

To watch the best parts of Mars Attacks!, click here (9 mins long):
http://www.youtube.com/watch?v=Bp3llVQh__Q

Title: Part needed for a '81 250GS
Post by: rob w on January 08, 2009, 10:20:41 PM

Big Dave,

Double check that part # you listed above.
The '81 manual says 5506026500.
I have four of those, brand new.
You're very welcome to one or two.
I'll shoot you the dimensions and a picture of one tomorrow.
I also have some other models from around those years, nos, I have'nt identified yet.

I also have a '81 250, complete engine for sale.

Bob

Title: Part needed for a '81 250GS
Post by: Dave Withrow on January 08, 2009, 10:58:12 PM

My mistake, Bob. I misread the numbers. I'll take a couple if you can spare them. Email me at [email protected] with a price and address to send $. Thanks.
Big Dave

Penton Owners Group

General Discussion => Wanted / For Sale => Topic started by: Dave Withrow on January 04, 2009, 04:50:59 PM