I need a piston 49.0 and/or 49.5 mm for alloy cylinder, Mahle preferred. -EP
Ernie P.
Chattanooga, TN
Ernie,
http://cgi.ebay.com/ebaymotors/SACHS-NOS-49-5mm-Piston-Penton-Hercules-100cc-Iron_W0QQitemZ120449930641QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item1c0b601591&_trksid=p4506.c0.m245&_trkparms=65%3A1|39%3A1
john d
John, Ebay listing says for Iron Barrel. Will this work on Alloy Barrel? Is there any difference. Thanks -EP
Ernie P.
Chattanooga, TN
Yes , i believe so.
It does on the 125's Ernie. Ask Doug he should confirm that.
The Rings will be like the KTM moly filled. I have an Iron Barrel piston in my 125 A engine with 200 miles on it. It did get run hard some and it is holding up well.
john d.
I believe I saw a box of 100cc pistons somewhere at Mid-O.
Lew Mayer
Lew,
That is not one bit :D. Besides, while you were having [:o)] at Mid-O, I was able to source a 49mm Sachs/Mahle NOS piston from a fellow POG member[8D], who like me, decided to forgo the Grand Nationals[xx(].
Ernie P.
Chattanooga, TN
Ernie, I was racking my brain trying to remember who had them. I wouldn't just tease you like that.;) Glad you found one, though.
Lew Mayer