Messages

Guys,
I agree with Brian. Let's ride at Cedartown or Fairmount Park.

Mark Liston
Rydal, GA
708-751-2043

Interesting ST Penton concept. Bike sold at a fair market value. Move on Penton ST's. The mark moves forward with restorers and confidence.

Kip,
I hav'nt seen the 4.50 x 18's for a while yet view ebay id no. 120651652069 for 4.0 x 18 NOS Barums, youtrash-mytreasures, if interested.

Mark Liston
NW Indiana

Ron,
I have not seen corespondence with photos of head that you sent. I will re-state my e-mail addy of [email protected] for clarity purposes. Look forward to it. If technology interfers I will just send you the money in advance.

Thank you,
Mark Liston
708-751-2043

Gents,
I thank you all for your informational contributions and my search is a little more condensed for my needs. I do have 2 ST 125 heads to barter,a 125 ST cylinder/piston in good shape at 54.5mm and flywheel case with no damage. Hope to find the desired 100cc ST head and we can talk.

I plucked what I believe to be a very, very late 1971 ST Berkshire enduro (V6580) from all places but a vintage church basement in central/eastern Indiana. The church was converted to a residence apartment and I thought I walked into 1970 ish all over again. Chevelle parts, big blocks, L88 hoods, 4 El Caminos and bikes. I left with 4 bikes and the renter was begging me to take a rough 1984 KTM 125 for free. My truck was overloaded and I could not accept or I would have lost it going home.

In summary I look forward to locating a ST 100cc head.

Mike G.-I appreciate the fin machining concept offer and may need if I fail at my ST 100cc search.

Ron C.- I look forward to hearing what you might have to assist me in my needs. FYI- the 125 5A I bought from you 10 months ago is purring well in the restored 1970 Six Days. Thanks again.

Mark Liston

Thank you all for your help and dimensional guides. The 33 mm inner dome or pocket dimension will aid me in my search. Just need locate that ST 100 cc head to finalize my project parts search

Mark

Dale/Gooddirt,
Thanks for the input. I am leaning that the casting numbers are not always correct as both my 125 5A's have the casting designation of 0613-109-097-GK which contradicts the 100 cc manual numbers.
Both my 125 heads have a 36 mm inner dome diameter.

Anyone know the inner dome diameter of a correct 100cc head? As mentioned earlier I am still wanting to buy a alum sunburst head.
Thanks,
Mark

James,
Based on careful reading of members input, previous experience and a  lining of my 70 steel tank last week I would highly recommend a product by Caswell. See their webpage "caswellplating.com".
Product no. is GTS1750. Product shipped is enough to do two normal size bike tanks. Cost is $39.99 and shipping to my residence in NW Indiana was $13.50 or so for a total of $53.50.

Mark Liston

Looking to buy a good 1970-1971 Sachs 100cc sunburst head for my 1971 V6580 Berkshire. Please contact me at [email protected].

Mark Liston
1970 Six Days
1971 Berkshire
1974 Husky 400WR
1976 Ossa Super Pioneer

I am a new member to POG and am restoring my V2327(six days) and V6580(berkshire)for my personal collection. Along the way I have acquired another V3842(six days)and would offer to sell/trade the following items to assist in my restorations before posting on E-Bay. Here's what I have:
V3842 Frame with swingarm
Front wheel assy with hub/brakes(rough rims)
Rear wheel assy with hub/brakes (rough rims)
Forks complete(no pitting-great shape)
Upper/lower triple clamp assy
Alum. air cleaner internal housing
Headlight brackets
Rough chrome headlight
Brake stay arm (rough finish)
Bing 27 mm carb
3 Sachs engines(1970-1971) of varying state

Here's what I am looking for:
1969-71 gas tank (better than rough)
1970-1971 exhaust pipe (better than rough)
CEV tail light assy in decent shape
100 cc Sachs engine(5A) or decent 100 cc top end
Plastic external air cleaner housing

I want to thank the folks for this site as without the POG members I would not be re-living the early 1970's again. I am not an expert as 98% of POG mebers so be patient if I have mis - described certain items. I want to thank Al B., Clay Light and Ron Carbaugh for their special help to date. I reside in NW IN and can ship/receive all within domestic reason. Please contact me at [email protected]

Mark Liston
1970 Six Days
1971 Berkshire
1974 Husky 400 CR
1976 Ossa SP