Messages

Excel....are very good...not cheap....light and strong...

Any photo's ?

Philip...if you send me your email I can send you a simple wiring diagrm I made while working on my bike. I've never have any luck trying to attach a photo to this [email protected]

Thanks Kevin...sending you an e-mail

You might try this guy....I know he rebuilds Koni'[email protected]  

quote:Originally posted by Carl Hill

Does anyone know where to get seals for Koni GP shocks?

I've always run Bel-Ray MC1 40-1 with Bel-Ray 80wt gear oil in all our bikes..very good protection

quote:Originally posted by Ajf

Hi,
I'm new to Sachs engines and want a good recommendation what to use and at what ratio on stock 125 5a with stock 1/24/153 carburetor with stock jets. Also what to use in transmission. Thank you

Larry is right they are Boge Mulholland's...the label is no longer clear enough to read...they are old but seem to work Ok...It's what I had to use at last years race...

quote:Originally posted by Oldebonz

What rear shocks are you using?Happy with them? How long? Thanks!!

Dale posted my pic   stock pipe cut with skyway..Thanks Mike

quote:Originally posted by checkcrew

Gary, hi, send me a couple pics of the pipe you have, i do have a stock pipe on a bike that we may be able to work something out but i need to see what you have,
use my email addy listed below,

regards,

Mike Gallagher, NJ.
[email protected]

Hi Mike....I just bought one off ebay.New condition couple months ago...never used I guess...not really understanding the difference between the enduro pacer and a regular speedo....I think what I should have on my jackpiner is a regular VDO speedo...If your interested let me know..I paid 120.00...or could trade if you have a clean regular speedo....thanks much Gary in Boise ... If you email me I could send photo'[email protected]

Excel makes a shouldered rim that looks just like an Akront....Pricey...I put one on my Jackpiner 2 years ago

Thanks Everyone...Will give them a try...

Website said no longer avail....but I will ask

quote:Originally posted by Keith Meatyard

Al B sells a nice repo of the tool bag.

Keith Meatyard

Thanks Ron No....I've got the bracket...just need the leather bag...I don't think they were probably anything that special...just trying to keep it "Real"...nearly finished ...was able to get a headlight socket  and speedo bracket with some help from Al B...

Thanks Much ....I will email you...I'll send you a photo...maybe you can straighten this out...

get it started ...push off with your legs...to get it rolling...put it into 1st...using clutch...like the other guy said ...ride it around pulling clutch in and out...come to a stop...if it stalls your clutch is stuck...Not a big deal really...pull side cover off...pull clutch apart and clean fiber plates with acetone or brake cleaner.if they look burned or glazed replace..throw in a new shift shaft seal...now's the time.. and the small oringbetween shift shaft and kickstarter... new gasket..fill with a good gear oil...I've always used Bel Ray 80wt...Go ride...its the best medicine