Messages

What size flywheel puller is used on a 6b motor ?
 Thanks

what air filter are you all using on a 74 125

have clutch assembly soaking in  Marvel  Misery oil

got the clutch off  what should i use to clean it its caked in sludge  and grit

paul  started to pull clutch  pressure plate and snap ring are off do i need a puller to get the clutch off it wont budge  by hand  

motor is still in frame  pulled clutch cover off its gummed up with old oil  got it to shift will clean all the gunk out

Paul yes I have met Don  he has a massive collection of vintage motorcycles  . He is the one who told me to join Penton Owners group .I found  some one  up here to build the motor an old  motocrosser from back in the day . Should have the bike put together and riding it by summer.

I am in Anchorage  Alaska the last machine shop that did motors  shut down last month

G Ellis im interested  I sent you a email. not sure you got it .

Penton part # is0283 101 100 this is for 1973 thru 1975   100 and 125

Will a 18 x 1.85 work . This bike Im restoreing  is missing the rear rim

i picked up a 73 125  motor was stuck from sitting 25 years  got piston free  crank turns n minimal lateral play  no play up and down  wont shift out of neutral up or down any tips on how to get tranny to shift THANKS JOE  

looking for some one to rebuild a 6 b motor .Preferably on the west coast   Thanks

looking for paint code for 1974 green gas tank

Want to buy Sachs 6b motor  .Prefer one that is running  or rebuilt . Will go in a 74 six days that Im restoreing  Any leads would be greatly appreciated .