Messages

Are these available on a website? They used to be a few years ago.
I am after a few sets of these too...

Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

Thanks guys!!

Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

Sorry,
I never received anything?
Can you send to [email protected]

or send me a link to photobucket (or similar)

cheers,
Adrian

Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

I'm building one too...
I'll use the 74 pipe and strip it back, get shrouding/brackets made to be similar to the original, buy one of the repro double ended mufflers to fit etc. Alot of work, but i have a mate that will help out...

Man, that motor would look good in my bike...lol, save me building mine up to look that good.




Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

Larry,

Your contributions are most welcomed here. Opinions from all sides are always welcomed.

Regards, Adrian

Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

400? The engine cases aren't the 560 type.

Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

ski racer, yes, interesting cutout, i got the cover like that. Easy access to the clutch cable.

Adrian

quote:Originally posted by skiracer

Interesting cut out for the front sprocket....

quote:Originally posted by adrian_goold

Where did you obtain the speedo drive?
I am chasing one myself, all mine have the tabs broken off as they were left on the bike over the years and never lubed.

Looking nice too!



Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

1976 MC 5 Original Owner
1982 Suzuki PE 175
1976 Penton 175 XC
1979 KTM 175 GS

Where did you obtain the speedo drive?
I am chasing one myself, all mine have the tabs broken off as they were left on the bike over the years and never lubed.

Looking nice too!



Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

Thanks Al!

Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

Has anyone got any further information on this?
Is this using a non-powerjet carb?
Has anyone got some specs for both the 250 and 400 using powerjet carbs?

Regards,
Adrian

I always use a smear of gasket goo on the outer edge of the seal when pressing it in to ensure a sealing surface when using the steel edged seals.
And yes, i would be pressing the seal in further to ensure both lips are on the flat surface.

When installing put a smear of a molykote o-ring or seal grease to the lip of the seal.



Regards,
Adrian Goold #101
http://www.ozktm.com
[/URL]
'73 175 Rebuilt|2x'74.5 250 |'74.5 400 Restoring|2 x'76 MC5 250 |'76 MC5 400 |'78 250 in pieces|'81 250 | '81 495|74 CZ 250|

Yes Mike,

I actually had mine running lower than stock when i used fox airshox on mine.

Adrian

Engine Parts Book:
https://drive.google.com/file/d/0B7Lj5G78cOndZGhXTkZZc0xLOWs/view?usp=sharing

Owners Repair Manual:
https://drive.google.com/file/d/0B7Lj5G78cOndd3YtQlBtbUlwY0E/view?usp=sharing

Regards,
Adrian

16.25 inch i believe.
Here is a link for the chassis parts book :

https://drive.google.com/file/d/0B7Lj5G78cOndcFdDaGZPYjJPWHc/view?usp=sharing

Regards,
Adrian Goold #101
http://www.ozktm.com

'73 175 Rebuilt|'74.5 250 Rebuilt|'74.5 400 Restoring|'76 MC5 250 Restoring|'76 MC5 400 Restoring|'78 250 in pieces|'81 250 Now Racing| '81 495 Now Racing|'84 125 Selling|'07 KTM 300| 74 CZ 250|74 CR250M x2|

.