Messages

Hi guys...some years ago when I was rebuilding a 74 250..I purchased a set of "rebuild kits" to suit Marzocchi shocks ....got new shafts seals etc..when they arrived they were bigger than the shafts in the shocks I had...so..I think approx I had 10 or 12mm shafts and the new ones were 13 or 14 ish ..not sure...anyway ...I have two complete  shocks (dis-assembled) but would require some mods to get the damper tubes etc to work with the new shafts I have....Have no use for them now anyone interested...Oh..they are in Australia

Some time ago I bought a repair kit that included nearly everything but a body. The kit was to suit the shocks with the finned piggyback body. New shafts, seals, tubes ... The guys name and e-mail is Mark Correll [[email protected]]

 

dave, I have spoken to the guy with the pistons. He has in stock 63.50mm which is Standard bore size, 63.75 which is 1st over, 64.00 which is 2nd over and 64.25 which is 3rd over. pistons are complete , that is with wrist pin rings etc . He tinks he also has gaskets kits and spare rings as well. If you want to get in touch with me I can give you his contact details.

 

Dave , I know a guy here in Australia who was the importer for KTM/Penton. I have seen a load of 175 piston assemblies on his shelves. I will check with him to see if he has any 64mm pistons.

 

Dave , I know a guy here in Australia who was the importer for KTM/Penton. I have seen a load of 175 piston assemblies on his shelves. I will check with him to see if he has any 64mm pistons.

 

WANTED: anyone in the US know where I can get Koni shock seals for the old steel body shocks 76F heavy duty series..have exhausted the stocks here in Australia.