Cover for ignition wires

[skiracer]

I am currently working on a non Penton project; a 175GP Husky.  The black casing around the ignition wires is cracked in several places, and I am looking for something to replace the original plastic casing.  Has anyone done this before?  James

[Mick Milakovic]

Haven't seen any original style tubing, but what about heat-shrink?

Mick

[skiracer]

I have thought about that, but I don't want to take the connector ends off the wire to slide heat-shrink on.  I am hoping to find something that can be split up the length, and placed over the wires.  Thanks for your input Mick.

[thrownchain]

Check out: //www.vintageconnections.com , look under sleeving. Maybe there is something there that will work.

[skiracer]

quote:Originally posted by thrownchain

Check out: //www.vintageconnections.com , look under sleeving. Maybe there is something there that will work.

YOU are the man!!!!  Great site, thanks!  James

[sixdazed]

Cool Site!
Thanks for posting,
                   Ric

ric emmal

[tomale]

I know of several guys that are using heat shrink tubing for this application but if you do make sure that you use the marine grade stuff, anythink less is just too brittle..

Thom Green,Still crazy after all these years!
76' 250 MC5 (orginal owner)
74'250 hare scrambler (project)
74' 1/2 440 maico
78' 440 maico
72' cr125 Husky (project)
74' TM125 suzuki
93' RMx 250 suzuki