Marzocchi shocks

[Bob Seymour]

Need a few parts to put these Marzocchi shocks I have into service on my 76 GS400. I am looking for 3 of the  8mm mounting bolt bushings/inserts and 1 of the rubber mounting inserts that go into the eyes of these shocks. This pair of shocks currently has 10mm bushing/inserts on one end and I am missing the rubber and insert on one of the other ends altogether. Also in need of 1 of the serrated collars that adjusts the spring tension. Mine is cracked. Thanks to all.
                                      Bob

[marsattacks]

Hi Bob if you search the site for "bushings" you will find some suggestions on fabbing them from brass. If that doesn't appeal to you try Thor Lawson's site -- he sells bushings that worked well with my Marzocchis. I assume that you do not have the "spherical" (there is a technical name I forget) outer bushings in any of the eyes -- that might complicate it a little. Good luck, John

Mars Attacks!

[marsattacks]

Here is a link to 12-8 reducer bushings.  He has 12-10 also.  These are steel.

http://ltthor.home.comcast.net/~ltthor/forsale.html