WANTED- 35mm Front End and Side Cover for '73 125

[tonupchad]

I'm looking for a complete or part of a 35mm from end for my 1973 125. Willing to pay cash or trade in part for 32mm front end or rusty BSA parts.

Going to Barber.

I'm also missing the drive (RH) side cover any condition.

[Randy Kirkbride]

Chad,
Call me about the cover.
7408194481

[tonupchad]

Randy,

Tom was unable to help me with the side cover due to an issue with his molds.

[checkcrew]

Chad,

check out KTM World in Ga. - the old H&H - Barry Higgins old place,

they have the best replacement fenders and side panels available for the 73 to 75 Penton's

the 35mm Ceriani forks and triples are out there but are getting harder to come by, if you see a set don't hesitate as they go quick !!

good luck,

Mike Gallagher, NJ.
[email protected]

[johnborn]

i have a set of 35mm triple clamps from a steel tanker,if that will help

[checkcrew]

quote:Originally posted by johnborn

i have a set of 35mm triple clamps from a steel tanker,if that will help

John,

the S/T clamps won't work, they need to be from 73 to 75 250's and 400's
or 1974 100's, 125's and 175's

Mike Gallagher, NJ.
[email protected]

[seanguthrie]

35's were stock on 68 and 69 6days correct?  If so I have a whole 68 steel tanker front end in Tampa Bay that's yours if you can bring the rest of the bike to Barber.  It's a haul, but if you can arrange transport you will be rewarded in Penton gold!

74 250 Hare scramble
2 68 Six Day (projects)

[checkcrew]

OK,
 the forks or clamps from any S/T from 68 to 71 will not work on the 72 and up CMF bikes,

hope this helps :-)

Mike Gallagher, NJ.
[email protected]

[tonupchad]

Helps greatly. Thanks all!