WANTED. 77 mc5 frame

Started by chicagojerry, May 27, 2014, 03:03:46 PM

Previous topic - Next topic

chicagojerry

hi guys. my personal race bike needs a frame replacement. the swingarm pivot bolt large end is starting to wallow around in its pinch bolt hole. going to unadilla this weekend if you have one that you can bring..    chi jer

454MRW

I have done a similar repair by welding up the large end of the swingarm bolt oversize, then turning it down to fit. You could also fashion some shim material to take up the slack. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R

Wesley Plunkett

Hi Jerry,

I have a good '76 MC5 frame and swingarm, also a tank and 2 sets of 35mm Marzocci forks I will probably never use as the post vintage class is pretty much nonexistant out here in AHRMA Northwest. Unfortunately I won't be anywhere near Unadilla anytime soon. I would love to trade for a good Sachs B or D motor though.

Wes

maurice reynolds

I have one that the top footpeg mount is broken on the left side, the bottom mount is fine and no cracks or rewelds anywhere, not close to you so would have to be shipped

chicagojerry

thanks wesley and maurice for the offer. i'm going to hold off from accepting either at this time. shipping frames gets pretty expensive and i think i can find one locally.. thanks again though   chicago jerry

maurice reynolds

No problem Jerry, if you do need a frame shipped from somewhere I have heard it's pretty reasonable to use Greyhound

Wesley Plunkett

I'm sure if you can't find one closer, you can figure out a good repair.

Wes

joe novak

Jerry,  I think I have what you need, and it is almost in your backyard.   I will get the frame no. for you soon.   joe

joe novak

5460489816 is the frame no.    joe

454MRW

That frame is a 76 cross country frame, not an MC5. 76-77 MC5 frames start with 550-#####. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R