1974 Sachs 125. Bing carb?

[Daniel Desranleau]

Hi,
Can someone answer my question?

I have a 6D motor with a Bing 84 carb; was this stock on the 125 or did someone change it?

Thanks,
Dan.

[firstturn]

All the D engines I have had had a 28mm Bing that mounted on a rubber manifold.


Ron Carbaugh

[Daniel Desranleau]

Thanks Ron,

That's the set-up I have.
The carb is pretty dried out and dirty in the bowl. Does Bing make a rebuild kit or is there a limited amount that can be done other than cleaning?

[454MRW]

Send it to Dan Vitaletti  at Vaporblast Solutions, LLC and it will come back shiny as new then install new gaskets and o-ring etc. which are available from Al Buehner on the suppliers page. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[Doug Knight]

I had a '74 1/2  with the GS motor.  I thought mine had 30 mm Bing. The bike weighed #20 more than an Elsinore and add another #20 of me and it needed that 30mm.

[Paul Danik]

Dan,

   You asked about the Bing 84 being the correct carb for the 6D powered Penton, it is what is on the machine I have sitting here and I know it is original. If others have different models of the Bing on their machines I am sure they will chime in. This link will provide much info on the Bing 84.

http://www.bingpower.de/download/datenblaetter/type84e.pdf

Paul

[gooddirt]

I tuned a monark gs pro with with a 32mm bing 84 on it.. also had 6mm cut off the piston (intake side) talk about dumping some fuel as the powerband hits!