Wanted 32mm Bing Have a 30 for trade ??

[t20sl]

Would like to find a 32mm Bing to swop or buy.  Needs to be style without choke on side of carb.  The 30 is also without outside choke.  32mm is for  a PUCH 175
Thanks, Ted

[454MRW]

I don't need a 30mm carb, but is this carb like the one you need? The slide has wear marks, and if you look closely, there is a crack at the base where the bowl mates up to the carb body below the fuel inlet, but I don't think it extends past the lip, plus it is missing the tickler assy. The inside is clean looking. Mike
mrwinter427@hotmail.com




Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[t20sl]

No the one I need is a clamp on style.  Yours is for Bultaco / Ossa with Spanish numbering system.  One needed would be 1/32/10?  Thanks though,

[454MRW]

I am not even sure where this came from, as I have never owned a Bultaco, Ossa, or Montesa, so if anyone can use this, make me an offer. Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[t20sl]

Mike:
There is one on Ebay with M110008 and it is said to be from a Montesa 250cc King Scorpion.  
Looks identical except has a bolt on fuel inlet.
Ted

[gooddirt]

I have a few  Bing 84's 32 mm  very good shape but non clamp.