Help Identifying this Tank Please

[tjcin]

This tank came with my 3 JackPiner purchase.  The seller told me it was an aluminum Hi-Point tank.  Can you guys please let me know your opinions and what bikes it fits.http://i1040.photobucket.com/albums/b401/timothyjcart/DSC02742_zpstda4iufj.jpg?1446417112553&1446417112798

Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3

[chicagojerry]

you need a picture of the bottom/tunnel of the tank. that will show with certainty if it will fit a hi breather frame, as i suspect that it will. chi jer

[tjcin]

I will post it tomorrow after work, thanks CJ. Tim

Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3

[tjcin]

http://i1040.photobucket.com/albums/b401/timothyjcart/DSC02759_zps9few6wl4.jpg


Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3

[chicagojerry]

it looks to me like it is a tank for a early 175, (1972) pre hi breather frame. it will not fit the later hi breathers,   chi jer

[tjcin]

As a newbie CJ, can you please educate as to a "hi breather".  I see the term, but don't know what it is.  Thanks, Tim.

Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3

[brian kirby]

The high breather had a square hollow frame backbone and the airbox intake was through it under the tank. The high breather requires a tank with a slightly wider channel than a non-high breather frame.

Brian

[tjcin]

Thanks for the education guys.

Tim C
1984 Yamaha RZ 350
1973 Honda CR 250M
1970 Honda CT 70H
1970 Yamaha RT1
1972 JackPiner X 3