68 Parts for V074

[SouthRider]

Hello Folks,

Work on V074 is progressing slowly.

I bought a TIG welder, and am re-teaching myself to tig weld for frame repairs (been 32 years, but the machine was cheaper than the quotes I was getting for fabrication....). This bike was rode hard and put away wet!

Still am seeking a few of the harder to find things and thought I'd put it out there again in case someone runs across:

Narrow front fender brace.

Sheet metal airbox - long or short (preferably long - can buy expensive re-pop short if it comes down to it...).

Ceriani shocks - preferably painted covers, or chrome top cover.

Heat Shield for pipe - either 2 or 3 mount type (should be 2 for this bike).

Would consider buying a rolling chassis or bike if it contained those items - I also have a 152 project in mind that wouldn't need those things.

Thanx for your consideration!

Clark

_____________________________________________________________________________________

"We the willing, led by the unknowing, are doing the impossible, for the ungrateful. We have done so much, for so long, with so little, that we are now qualified to do almost anything, with nothing."

1972 Penton Berkshire 100
1983 Husqvarna 250 XC
2011 Jayco 31.5 RLDS
2009 Chevy 2500 HD Duramax