1976 MC 5 Kickstart ratchet

Started by tjbowers, March 21, 2020, 02:04:38 PM

Previous topic - Next topic

tjbowers

Hello, I have been working on a 1976 Penton 250 for a couple years. Both engines were basket cases so I am slowly finding parts as I put one back together. The manual shows a thrust washer in between the kick shaft gear and rathcet gear on the kick start. When I took these motors down neither had them installed between these two gears.I assume there should be one but neither had it.Is it necessary and does anyone have a size for it if it is needed and material it is made from? Thanks so much.

TJBowers
TJBowers

454MRW

Give Gary Ellis a call or text 217-260-0237

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Penton
1976 MC5 400
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM's
1976-78 125-400 RM's
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R

tjbowers

TJBowers