72 Berkshire 100 swing arm bushings

[swamp fox]

Looking through the forum, I saw where some swingarm bushings were being made by Dom. Have these been finished and how can I get them?

Robert Manucy
72 Berkshire

[john durrill]

Robert,
 send Dom an E-Mail and see how its comming along.
here is his address
[email protected]
John D.

 

[swamp fox]

Thanks John, I just sent Dom an email and hope to hear back from him. I'll let you know what his response is.

Robert Manucy
72 Berkshire

[swamp fox]

John,
I haven't heard anything back from Dom. Still waiting to see.

Robert Manucy
72 Berkshire

[Lew Mayer]

Robert,
 Fisher cycle may still have some. I got a pair recently for a Jackpiner.

Lewis A Mayer

[swamp fox]

John,
I just heard from Dom and he said he was about to send you one for testing. I told him I would be interested in how the process evolves.

Robert Manucy
72 Berkshire

[swamp fox]

Thanks Lewis,
I'll keep them in mind if I decide to go that route.

Robert Manucy
72 Berkshire

[john durrill]

Good news Robert,
 thanks for the update. I sent Dom an e-mail last night asking how things are going. we will put the new bushings when we get them in the sachs 175 and test them out. we have a chance at a 100 mile ride at the end of the month in Tally with Rick G. and a 2 day dual sport ride in Sept. we let you know how they work and whats involved.

 

[Larry Perkins]

Glad the bushings are going to happen but go figure.  I send Dom a NOS bushing for a sample to make these and then John gets the first ones to try out.  John, when you talk to Dom find out when I can get my sample back so I have a set.

 

[john durrill]

I will Larry,
 asked him about it last month. we remind him and see what happens.
John D.

 

[swamp fox]

Hi Larry,
 I'll keep you in mind for the bushings if these don't work out. I have talked to Doug about working on my motor and getting it shimmed out correctly since I don't have access to the depth gauges.

Robert Manucy
72 Berkshire

[john durrill]

Ok Dom, is about to make the first run of swing arm bushings.
 looks like they will be made of Bronze.
 We have an option of keeping the old outer sleeve from the orignal bushing and usein it for the new nearing to mate against or use the swing arm pivot point.
 what would everyone perfere?
 my thinking is the the old outer sleeve could be replaced if it wears , at some later date with a new sleeve. that would be my choice. everone conserned please provide input. Dom is about to make up the first run this week.
 John D.